I have the opportunity to convert an old electric kiln to LP and found that leasing a tank is supposedly very inexpensive. This way I can get to cone 10 temperatures without shortening the life of my electric kiln, experiment with reduction and test glazes in an environment closer to a wood kiln. 

I’ve been working nights to get some more work done. It’s much cooler. The Georgia summers are just brutal with the heat and humidity. 

I’ve been using porcelain exclusively for a month and it’s a beautiful thing. I’m trying to push it to its limits, which means that my scrap bucket does not go hungry 🙂 

I am experimenting with some irregular shapes and found the issue of trimming the bottoms was a pretty simple solution. I used a large enough lump of clay as a chuck. I should turn a few sizes on the wheel and then bisque. I can use a small lump of clay (carpet under-matting or similar) as an adhesive. This will solve the secondary problem of not being able to bear down on the clay to get a good cut. 

  
 
I’ve been finding things to do indoors as well. So I have hijacked my own island in the kitchen for my small ceramics projects that don’t need the wheel. I have a beautiful backdrop thanks to my wife 😀

  
Been carving with the Mudtools brand tools. The Do-All Trim Tool is a Ferari of a tool and just gets better the more I use it.  The Drag Tool, I still need some practice with but there are a lot of possibilities there too. I’ve been making small guinomi chalices as they are small, quick jobs and keep my pinching skills up.